1300mm Two Head Body Floating Primer Sander
Sand primer 1st time heavily, then precisely sand 2nd and polish before finishing.
It is designed for heavy duty primer sanding tasks. Special upper body suspending design to make it workable to connect into an automatic primer coating and sanding line.
Why Primer Sander Better Needs Upper Float Body?
Upper Float Body Primer Sander is demanded for connecting into an auto line. Work table height is fixed and in the same height as the conveyor table of other equipment in the line. Top body is separated and suspended over the machine frame and connected with four lifting guide sleeves. For work piece in different thickness, adjust guide sleeve to realize upper body lift furthermore control sanding roller to be in corresponding position for fine sanding and grinding. Guide sleeve is bolded and prolonged for high stability.
Technical Advantage
1. Top body wholly lift design. Connect to UV lacquer coating equipment to make a line.
2. Work table can be adjusted to the consistent height of conveyor table of lacquer coating equipment.
3. Variable frequency control over work table, which work synchronously with conveyor table of lacquer coating equipment.
4. Sanding roller can lift to suit for lacquer sanding of wood board in different thickness.
5. Rubber roller in shore 25掳 natural soft rubber锛宧igh sanding precision and brightness.
6. After sanding lacquer then clean dust from lacquer surface to make sanded lacquer clean and bright.
7. Belt Wind Blow Dust Control System, clean belt dust automatically to prolong belt useful life.
Eccentric Roller Adjusting Deviation
This machine adopts new type eccentric roller structure. In traditional way, use 8 screws to fix rollers to frame. In this way, traditional sanding frame always gradually incline to one end, always lower. Horizontal beam and supporting beam used for new type eccentric roller are soldiered to machine frame with thick wall square iron tubes. These iron tubes are being aging treated, horizontal beam does not hang down. Eccentric roller are assembled to bearing bending board and vertical boards. Rollers are lifted by two screw.
ModelSFL1300-R1C1SFL1300-R2C1
Working thickness10-100mm10-100mm
Working width30-1300mm30-1300mm
Min working length200mm200mm
Total motor power19.32kw30.32kw
Main motor power (variable frequency)15kw15KW
2nd frame motor power/11kw
Lift motor power0.55kw0.55kw
Wind blow motor power0.25kw0.25kw
Brush roller motor power0.55kw0.55kw
Feed speed5-25m/min5-25m/min
Air pressure鈮?.6Mpa鈮?.6Mpa
Outer size1900*2200*22002260*2580*2250China Upper Floated Lacquer Sanders
website:http://www.chinasander.com/wide-belt-sander/upper-floated-lacquer-sanders/

Sorry, comments are unavailable..

Share


QR code